//   ==================================================================
//   >>>>>>>>>>>>>>>>>>>>>>> COPYRIGHT NOTICE <<<<<<<<<<<<<<<<<<<<<<<<<
//   ------------------------------------------------------------------
//   Copyright (c) 2006-2011 by Lattice Semiconductor Corporation
//   ALL RIGHTS RESERVED 
//   ------------------------------------------------------------------
//
//   IMPORTANT: THIS FILE IS AUTO-GENERATED BY THE LATTICEMICO SYSTEM.
//
//   Permission:
//
//      Lattice Semiconductor grants permission to use this code
//      pursuant to the terms of the Lattice Semiconductor Corporation
//      Open Source License Agreement.  
//
//   Disclaimer:
//
//      Lattice Semiconductor provides no warranty regarding the use or
//      functionality of this code. It is the user's responsibility to
//      verify the user’s design for consistency and functionality through
//      the use of formal verification methods.
//
//   --------------------------------------------------------------------
//
//                  Lattice Semiconductor Corporation
//                  5555 NE Moore Court
//                  Hillsboro, OR 97214
//                  U.S.A
//
//                  TEL: 1-800-Lattice (USA and Canada)
//                         503-286-8001 (other locations)
//
//                  web: http://www.latticesemi.com/
//                  email: techsupport@latticesemi.com
//
//   --------------------------------------------------------------------
//                         FILE DETAILS
// Project          : LatticeMico32
// File             : lm32_shifter.v
// Title            : Barrel shifter
// Dependencies     : lm32_include.v
// Version          : 6.1.17
//                  : Initial Release
// Version          : 7.0SP2, 3.0
//                  : No Change
// Version          : 3.1
//                  : No Change
// =============================================================================

`include "lm32_include.v"

/////////////////////////////////////////////////////
// Module interface
/////////////////////////////////////////////////////

module lm32_shifter (
    // ----- Inputs -------
    clk_i,
    rst_i,
    stall_x,
    direction_x,
    sign_extend_x,
    operand_0_x,
    operand_1_x,
    // ----- Outputs -------
    shifter_result_m
    );

/////////////////////////////////////////////////////
// Inputs
/////////////////////////////////////////////////////

input clk_i;                                // Clock
input rst_i;                                // Reset
input stall_x;                              // Stall instruction in X stage
input direction_x;                          // Direction to shift
input sign_extend_x;                        // Whether shift is arithmetic (1'b1) or logical (1'b0)
input [`LM32_WORD_RNG] operand_0_x;         // Operand to shift
input [`LM32_WORD_RNG] operand_1_x;         // Operand that specifies how many bits to shift by

/////////////////////////////////////////////////////
// Outputs
/////////////////////////////////////////////////////

output [`LM32_WORD_RNG] shifter_result_m;   // Result of shift
wire   [`LM32_WORD_RNG] shifter_result_m;

/////////////////////////////////////////////////////
// Internal nets and registers 
/////////////////////////////////////////////////////

reg direction_m;
reg [`LM32_WORD_RNG] left_shift_result;
reg [`LM32_WORD_RNG] right_shift_result;
reg [`LM32_WORD_RNG] left_shift_operand;
wire [`LM32_WORD_RNG] right_shift_operand;
wire fill_value;
wire [`LM32_WORD_RNG] right_shift_in;

integer shift_idx_0;
integer shift_idx_1;

/////////////////////////////////////////////////////
// Combinational Logic
/////////////////////////////////////////////////////
    
// Select operands - To perform a left shift, we reverse the bits and perform a right shift
always @(*)
begin
    for (shift_idx_0 = 0; shift_idx_0 < `LM32_WORD_WIDTH; shift_idx_0 = shift_idx_0 + 1)
        left_shift_operand[`LM32_WORD_WIDTH-1-shift_idx_0] = operand_0_x[shift_idx_0];
end
assign right_shift_operand = direction_x == `LM32_SHIFT_OP_LEFT ? left_shift_operand : operand_0_x;

// Determine fill value for right shift - Sign bit for arithmetic shift, or zero for logical shift
assign fill_value = (sign_extend_x == `TRUE) && (direction_x == `LM32_SHIFT_OP_RIGHT) 
                      ? operand_0_x[`LM32_WORD_WIDTH-1] 
                      : 1'b0;

// Determine bits to shift in for right shift or rotate
assign right_shift_in = {`LM32_WORD_WIDTH{fill_value}};

// Reverse bits to get left shift result
always @(*)
begin
    for (shift_idx_1 = 0; shift_idx_1 < `LM32_WORD_WIDTH; shift_idx_1 = shift_idx_1 + 1)
        left_shift_result[`LM32_WORD_WIDTH-1-shift_idx_1] = right_shift_result[shift_idx_1];
end

// Select result 
assign shifter_result_m = direction_m == `LM32_SHIFT_OP_LEFT ? left_shift_result : right_shift_result;
    
/////////////////////////////////////////////////////
// Sequential Logic
/////////////////////////////////////////////////////

// Perform right shift
always @(posedge clk_i `CFG_RESET_SENSITIVITY)
begin
    if (rst_i == `TRUE)
    begin
        right_shift_result <= #1 {`LM32_WORD_WIDTH{1'b0}};
        direction_m <= #1 `FALSE;
    end
    else
    begin
        if (stall_x == `FALSE)
        begin
            right_shift_result <= #1 {right_shift_in, right_shift_operand} >> operand_1_x[`LM32_SHIFT_RNG];
            direction_m <= #1 direction_x;
        end
    end
end 
    
endmodule